Trans-differentiation of human adipose-derived mesenchymal stem cells into cardiomyocyte-like cells on decellularized bovine myocardial extracellular matrix-based films

In this study, we aimed at fabricating decellularized bovine myocardial extracellular matrix-based films (dMEbF) for cardiac tissue engineering (CTE). The decellularization process was carried out utilizing four consecutive stages including hypotonic treatment, detergent treatment, enzymatic digestion and decontamination, respectively. In order to fabricate the dMEbF, dBM were digested with pepsin and gelation process was conducted. dMEbF were then crosslinked with N-hydroxysuccinimide/1-Ethyl-3-(3-dimethylaminopropyl)-carbodiimide (NHS/EDC) to increase their durability. Nuclear contents of native BM and decellularized BM (dBM) tissues were determined with DNA content analysis and agarose-gel electrophoresis. Cell viability on dMEbF for 3rd, 7th, and 14th days was assessed by MTT assay. Cell attachment on dMEbF was also studied by scanning electron microscopy. Trans-differentiation capacity of human adipose-derived mesenchymal stem cells (hAMSCs) into cardiomyocyte-like cells on dMEbF were also evaluated by histochemical and immunohistochemical analyses. DNA contents for native and dBM were, respectively, found as 886.11?±?164.85 and 47.66?±?0.09?ng/mg dry weight, indicating a successful decellularization process. The results of glycosaminoglycan and hydroxyproline assay, and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), performed in order to characterize the extracellular matrix (ECM) composition of native and dBM tissue, showed that the BM matrix was not damaged during the proposed method. Lastly, regarding the histological study, dMEbF not only mimics native ECM, but also induces the stem cells into cardiomyocyte-like cells phenotype which brings it the potential of use in CTE.     

Scalable fabrication of novel SiC nanowire nonwoven fabric

Flexible papers constructed by one-dimensional nanowires have attracted much attention due to their various applications. Herein, a novel nonwoven fabric with paper-like qualities composed of zinc blende SiC (β-SiC) nanowires was fabricated by a scalable rolling process. The SiC nanowires were synthesized by the carbothermal reduction reaction of the carbon fiber and carbonaceous silica xerogel. The crystal phase, morphology and microscopic structure of the as-prepared SiC nanowires were characterized by field emission scanning electron microscope, X-ray diffraction and high-resolution transmission electron microscopy. The nanowire vapor–solid growth mechanism and preparation process for SiC nanowire nonwoven fabric were also discussed. The freestanding SiC nanowire nonwoven fabric exhibited high flexibility, high mechanical strength, excellent refractory performance and thermal stability. With high flexibility, high mechanical strength, superior nonflammability and thermal stability, the flexible paper-like 3C-SiC nanowire nonwoven fabric materials would be expected to have some potential applications, such as ceramic matrix composites, metal matrix composites, energy storage, catalyst supports, radiation-proof fabric, filtration and separation.     

In-situ synthesis of zirconium oxycarbide by electroreduction of ZrO2/C in molten salt

Homogenous ZrC_xO_y powders have been successfully synthesized by in-situ electro-reduction of solid ZrO₂–C composite precursors in molten CaCl₂. The effect of applied cell voltage and molar ratio of ZrO₂ to C on preparation of ZrC_xO_y were investigated. The reduction pathway of the composite electrode was studied based on the analysis of intermediate products using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results show that ZrO₂ is firstly converted to CaZrO₃. The resulting CaZrO₃ is then reduced to ZrC_xO_y. The ZrC_xO_y formation is dramatically influenced by electrolysis voltage and molar ratio of ZrO₂ to C: a higher cell voltage and lower molar ratio of the ZrO₂ to C are more preferable for the formation of ZrC_xO_y powder. Homogenous ZrC_xO_y powders with particle size of ~100 nm are synthesized by ZrO₂/C starting elemental powders in CaCl₂ molten salt at 1123 K for more than 3 h, when the cell voltage is 3.0 V and the molar ratio of the ZrO₂ to carbon starting materials is 1:1.0.     

基于回归分析的玉米膜下滴灌适宜土壤含水量及阈值研究

为确定半干旱地区膜下滴灌条件下玉米生长与土壤含水量间的关系,利用通榆灌溉试验站2018年度玉米膜下滴灌灌溉制度试验数据,分析不同灌溉制度下的玉米产量,并对不同灌溉制度下的玉米株高、茎粗、叶面积等指标进行回归求解,得到了玉米各生育阶段的适宜土壤含水量及其阈值.玉米膜下滴灌各生育阶段的适宜土壤含水量区间:苗期65％—75％、拔节期70％—80％、抽雄吐丝期75％—85％、灌浆期75％—85％、乳熟期70％—80％;水分胁迫阈值:苗期50％、拔节期57％、抽雄吐丝期66％、灌浆期60％、乳熟期58％.     

Study on element detection and its correction in iron ore concentrate based on a prompt gamma-neutron activation analysis system

A prompt gamma-neutron activation analysis(PGNAA) system was developed to detect the iron content of iron ore concentrate. Because of the self-absorption effect of gamma-rays and neutrons, and the interference of chlorine in the neutron field, the linear relationship between the iron analytical coefficient and total iron content was poor, increasing the error in the quantitative analysis. To solve this problem, gamma-ray self-absorption compensation and a neutron field correction algorithm were proposed, and the experimental results have been corrected using this algorithm. The results show that the linear relationship between the iron analytical coefficient and total iron content was considerably improved after the correction. The linear correlation coefficients reached 0.99 or more.     

Dishwashing behaviour of European consumers with regard to the acceptance of long programme cycles

Since the introduction of the energy label for household dishwashers in the EU, manufacturers have been incentivised to reduce resource consumption and increase the energy efficiency of their appliances. Technological progress has led to very efficient programmes with cleaning cycles of 3 to 4 h or longer. The European Commission recently initiated a revision of the energy label and Ecodesign requirements, leading to their adjustment to the state of the art and to actual usage patterns. The University of Bonn was tasked with investigating dishwashing habits in Europe. An online survey was conducted in 11 countries of the EU with more than 5000 participants. The survey focused on the choice of programme, attitudes towards energy-saving programmes and practices and the willingness to apply them. It appears that consumers are willing to apply energy-saving practices and to use energy-saving programmes, but the acceptance of long cycles that take more than 2 h is low, which stands in contradiction to the fact that 19% of all dishwashing cycles are run in the Eco programme, which takes more than 2 h in most cases. The percentage of people who understand that long cycles can be energy-efficient is smaller than the percentage of those who do not believe this. The statements of the participants are contradictory regarding the importance of saving energy and of programme duration. The results of the survey point out the importance of better consumer education and better communication by manufacturers, consumer organisations and legislation.     

Unavoidable front contact model of Si solar cell through a generalized effective medium approximation approach

Fill factor of the solar cell mainly depends on series resistance and contact resistance, which are the most effective parameters to collect carriers (electrons and holes) from both electrodes of C-Si solar cells. We have used both mathematical and experimental approaches to reduce these resistances for enhancement of power conversion efficiency (PCE) by increasing fill factor. After processing by light-induced plating (LIP) for metal contact, the PCE of solar cell is obtained as 14.43%, which is 8.8% more than that before LIP processing.     

Preparations and tribological properties of soft-metal/DLC composite coatings by RF magnetron sputter using composite targets

This work reports the characteristics and tribological properties of both Ag/DLC nanocomposite coatings (RF-Ag-DLC) and Cu/DLC nanocomposite coatings (RF-Cu-DLC) with hydrogen-free DLC matrix deposited by RF magnetron sputtering using a concentric composite target (CCT). The CCT consisted of a C base target and metal tablet, and the tablet was located on the center of the base target concentrically where the etching rate by Ar ions is extremely low. By changing the diameter of Ag or Cu tablets in CCT, RF-Ag-DLC with an Ag concentration ranging from 6 to 65 at.% and RF-Cu-DLC with Cu concentration ranging from 7 to 75 at.% can be prepared. These coatings show a granular structure having Ag or Cu nano-crystals with a diameter ranging from 5 to 10 nm dispersed homogeneously in the hydrogen-free DLC matrix. The friction coefficient of DLC varied depending on the species and content of metal. The transition of the friction coefficient became stable when metal-rich tribofilms formed on the counterfaces.     

Chemical Communication and Reproduction Partitioning in Social Wasps

Social wasps encompass species displaying diverse social organization regarding colony cycle, nest foundation, caste differences (from none to significant dimorphism) and number of reproductive queens. Current phylogenetic data suggests that sociality occured independently in the subfamily Stenogastrinae and in the Polistinae+Vespinae clade. In most species, including those with the simplest social organization, colony reproduction is monopolised by a single or few females. Since their nest mates can also develop ovaries and lay eggs, dominant females must somehow inhibit them from reproducing. Physical interactions in the form of open aggression or, usually, ritualised dominance by the fertile females contribute to fertility inhibition in several species, but it is unlikely to function in large colonies. In the latter case, reproduction within the colony is likely to be regulated through pheromones. Relatively little is known about these semiochemicals. Studies on all the three social wasp subfamilies, revealed that cuticular hydrocarbon components differ in abundance between egg-laying and not egg-laying females and that their composition depends on fertility status. In several species, females have been reported to manifestly react towards females with activated ovaries, but there is little evidence to support the hypothesis that fertile individuals are either recognized through their CHC composition, or that over-represented CHC constituents can inhibit fertility. Moreover, very little information exists on the possibility that exocrine glands release fertility signals or chemicals inhibiting fertility.